Commercial · Hard-floor restoration
Bring tired floors back to showroom finish.
Stripping off years of yellowed, scuffed finish and rebuilding it properly is the single most visible improvement you can make to a commercial space — usually overnight, and for a fraction of replacement cost.
- Multiple protective coats
- Overnight & weekend scheduling
- Free on-site floor assessment
Written quote back within 24h — Bonded & insured.

Why you can trust Royal Clean Solutions
Bonded & insured
Full coverage on every job, every visit.
Vetted crews
Background-checked before they enter your space.
Eco-friendly products
Low-residue and safer around staff, kids and pets.
Satisfaction guarantee
Not happy? We re-clean it at no extra charge.

The real problem
You're not looking at a dirty floor. You're looking at dead wax.
When a vinyl or tile floor goes dull, grey and scuffed, mopping it harder does nothing — because the dirt isn't on the finish, it's in it. Years of traffic drive grit through the wax layer, which yellows, crazes and traps everything that lands on it.
At that point there are two options: replace the floor, or strip the old finish back to the substrate and rebuild it. The second costs a fraction of the first and usually happens over a single weekend.
Buffing a dead finish.
Polishing degraded wax just makes a duller shine. Once it's crazed, it has to come off.
Too few coats.
One or two coats look fine on day one and fail within months. Traffic level dictates how many the floor actually needs.
Rushed dry times.
Walking on a finish before it cures locks in footprints permanently. Proper scheduling isn't optional.
The payoff
What restoring your floors actually does
Defers replacement
A protected substrate lasts years longer. Restoration is a small fraction of the cost of a new floor — and far less disruptive.
Improves slip resistance
A correctly applied commercial finish gives a consistent, predictable surface rather than patchy worn areas.
Transforms the space
Nothing changes how a room reads faster than the floor. It's the most visible return per dollar in commercial cleaning.
Cuts daily cleaning time
Sealed, protected floors release dirt instead of holding it. Routine mopping gets faster and more effective.
Protects your brand
Customers and tenants read a scuffed, yellowed floor as neglect — fairly or not.
Better hygiene
Grit and residue trapped in degraded wax is a reservoir for bacteria. A sealed surface cleans properly.
What's included
Our five-step strip & wax process
Skipping any of these is why floors fail early. We do all five, every time.
01Preparation & stripping
- Free on-site assessment of floor type, condition and traffic
- Furniture moved and edges, bases and fixtures protected
- Commercial stripping solution applied and given full dwell time
- Machine scrubbed to lift all old finish and embedded soil
- Edges, corners and baseboards hand-detailed
- Solution extracted and the floor neutralised
02Deep clean & surface prep
- Full rinse to remove all stripper residue
- pH neutralised so the new finish bonds correctly
- Floor inspected for damage, lifting tiles or failed seams
- Surface dried completely before any coating
- Any remaining marks spot-treated
- Substrate condition reported back to you honestly
03Finish & protect
- Multiple thin coats of commercial-grade floor finish
- Coat count set by traffic level, not by a fixed package
- Full cure time between coats — never rushed
- High-speed buff to the gloss level you want
- Final inspection walk with your site contact
- Maintenance plan so the finish lasts its full life
Need something not on this list?
Every plan is built to your space — tell us what matters and we'll scope it in.
- We walk the space first
- Written quote in 24h
- No long-term contract
Why Royal Clean Solutions
Why choose us over a DIY buff or a cheaper bid
Strip and wax is one of the easiest jobs to underbid and one of the most expensive to get wrong.
Trained, vetted crews
Every cleaner is background-checked and verified before they ever enter your space — and you get the same faces, not a rotating cast.
Built for Denver conditions
Winter salt and ice-melt tracking, summer dust, high-altitude allergens. We clean for what buildings on the Front Range actually face.
One point of contact
A dedicated account manager owns your schedule, your special requests and your quality — so you're never chasing a crew.
Quality you can verify
Documented checklists and routine QC inspections. If something's missed, we come back and re-clean it at no extra charge.
Scheduling that fits you
Daytime, after-hours, nightly or weekend. We work around your operations instead of interrupting them.
No long-term traps
Clear, transparent pricing and month-to-month flexibility. You stay because the work is good, not because you're locked in.
Our process
Scheduled so your floor is ready for Monday
Stripping and waxing needs an empty floor and real cure time. We work overnight and across weekends so your operation never stops.
- 01
Free floor assessment
We identify the floor type, assess how much finish is on it and tell you honestly whether it needs a strip or just a scrub and recoat.
- 02
Strip the old finish
Solution applied, given full dwell time, machine scrubbed and hand-detailed at every edge, then extracted and neutralised.
- 03
Build the new finish
Multiple thin coats with proper cure time between each, at the coat count your traffic level actually requires.
- 04
Buff, inspect & maintain
High-speed buff to your preferred gloss, a walk-through with your contact, and a maintenance plan to protect the investment.
Our work
Recent results from Denver jobs.

Corridor floor — strip, wax and buff

Old finish removal, Denver metro

Vinyl floor restoration
What clients say
Reviewed by the people who let us in.
Real, unedited Google reviews from Royal Clean Solutions customers.
Based on 11 Google reviews
Professional strip and wax services in Denver, CO
Commercial hard floors — VCT, vinyl, linoleum, sealed concrete and many tile systems — are protected by a sacrificial finish, not by the material itself. That finish is designed to take the abuse so the floor underneath doesn't.
Over time it does its job and fails: yellowing, crazing, trapping grit and going dull no matter how often it's mopped. Strip and wax removes that spent layer entirely, cleans and neutralises the substrate, then rebuilds protection with multiple thin coats of commercial-grade finish.
Royal Clean Solutions provides strip and wax floor care across Denver and the Front Range for offices, retail, medical suites, schools, warehouses and property-managed buildings.
How often should commercial floors be stripped and waxed?
Full strip and wax is typically needed every 6 to 12 months, but traffic is what really decides it. A busy retail entrance or a school corridor may need it twice a year; a low-traffic private office can run well beyond twelve months.
Between full strips, a scrub and recoat — removing the top layers rather than everything — extends the life of the finish considerably and costs less. Part of our assessment is telling you honestly which of the two your floor needs, including when the answer is 'not yet'.
Questions, answered
Strip & Wax Floor Care — the questions we get asked most.
How often should floors be stripped and waxed?
Typically every 6 to 12 months, though traffic matters far more than the calendar. High-traffic entrances, corridors and retail floors often need it twice a year; low-traffic private offices can go well beyond a year. Between full strips, a scrub and recoat extends the finish at lower cost — we'll tell you which one your floor actually needs.
How long does it take for floors to dry after waxing?
Each coat needs roughly 30 to 60 minutes before the next goes down, and the completed finish needs several hours before light foot traffic. We recommend leaving it overnight before normal use, and 24 to 48 hours before heavy equipment, rolling loads or furniture goes back. That's exactly why we schedule this work for evenings and weekends.
Is professional strip and wax better than doing it in-house?
For anything beyond a very small area, yes — and usually by a wide margin. The difficulty isn't the buffing, it's the stripping: incomplete removal means the new finish won't bond and will fail within months, and stripper left on the substrate can damage the floor permanently. Commercial-grade finish, machinery and correct neutralising aren't practical to replicate in-house for an occasional job.
Which floor types can you strip and wax?
VCT, vinyl and linoleum, sealed concrete, and most commercial tile systems. Some surfaces should never be waxed — unsealed natural stone, certain engineered timber and some LVT products among them — and we'll tell you at the assessment if yours is one of them rather than coating something that shouldn't be coated.
Are your floor care products safe for staff and occupants?
Yes. We use commercial products selected for low odour and low residue, and because this work happens out of hours the space is ventilated and fully cured before anyone returns. For sensitive environments such as medical or educational settings, tell us and we'll match the product specification to your requirements.
Do you move furniture as part of the job?
Yes. Moving and replacing furniture is included in the scope, and we protect baseboards, fixtures and adjacent surfaces before any solution goes down. Very heavy or fragile items — server racks, medical equipment, display fixtures — are flagged at the assessment so we can plan them properly rather than improvising on the night.
Still not sure?
Talk it through with our Denver team — no script, and a straight answer on price.
Keep exploring
Services that pair well with this one.
Ready when you are
Get a free on-site floor assessment.
We'll tell you honestly whether your floor needs a full strip, a scrub and recoat, or nothing at all yet — with a written price either way.
- Written quote in 24h
- We walk the space before we price it
- No long-term contract



